Technology of application

  Preseeding processing

Preseeding processing of seeds by fertilizers «AMRITA» is made, as a rule, together with poisoning in the mechanised way allowing in regular intervals to process seeds. Рoisoning, at use together with «AMRITA» it is necessary to reduce the expense to 25-30 % from recommended norm since «AMRITA» possesses fungus properties at the expense of presence of ions of copper (Cu2 +) and zinc (Zn2 +).
Order preparation of a working solution and preseeding processing of seeds together with etching:
1. Prepare necessary quantity (norms of the expense in instructions) fertilizers «AMRITA» on 1т seeds (for example  see, for wheat 3-4л).
2. Prepare necessary quantity poisonig (on 25-30 % less than recommended norm).
3. Prepare a necessary quantity of water from calculation that the total amount of a working solution («AMRITA» + poisoning + water) was equal recommended for processing 1т seeds (for example, 10 l for grain).
4. Before mixing it is recommended to check up preparations on compatibility. For this purpose it is necessary to prepare a small amount of a working solution (for example to take 30-40 ml «AMRITA» to dissolve with water to 90 ml to add poisoning in the quantity corresponding of 90 ml of a solution to mix). The mix should not give a deposit. Insignificant turbidity of a solution is supposed.
5. Dilute «AMRITA» with the calculated quantity of water and add there the prepared quantity poisoning at hashing.
Extraroot top dressing of crops (spraying)

most effective and economic way of entering fertilizers are extraroot top dressing of crops. Getting on a sheet surface, helates microcells easily get into its fabrics where they in some hours arrive in a metabolism.
Fertilizers are well combined with the majority of protection frames of plants that allows to combine simultaneously struggle against illnesses, wreckers and extraroot top dressing of plants. Thus fertilizers still remove stress of plants from chemicals.
The working solution for extraroot top dressing prepares directly ahead of the use as follows:
- The sprayer tank is filled on 50-70 % with water;
- The necessary quantity of fertilizer «AMRITA» joins;
The note: It is recommended to spend preliminary trial preparation of a working solution in small volume for check on compatibility. A compatibility sign is absence of a deposit.

Recommended concentration of fertilizers in a working solution of 1,5 % volume.
At processing of young, top leaves of vegetable cultures, before the beginning of flowering of fruit and berry cultures working concentration of a solution should be approximately 0,25 – 0,3 % (volume).
At processing of plants, trees with ended growth of leaves, before the maturing beginning, at a bookmark of flower and fruit kidneys working concentration of a solution should be approximately 0,5 – 1,0 % (volume).
Temperature mode of application:
At extraroot top dressing the temperature of a working solution should make nearby +20°С, but not less +10°С, and air temperature should be not more low +10°С and above +25°С (at daily average temperature not more low +5°С, i.e. plants should vegitate). Top dressing to carry out early in the morning or in the evening, not to apply at intensive solar insolation.

Application of fertilizers  «AMRITA»  systems of a drop irrigation

Approximate calculation of quantity of fertilizers at a drop irrigation:
1. The general expense of fertilizers makes 8-10 liters on 1га for a season.
2. At the expense of water 10 м3 on 1 hectare at an o'clock and 10 hour watering it is necessary:
2.1. The first dose of fertilizers to submit in a phase of 3-4 present leaves if to submit fertilizers all 10 hours, necessary concentration of 20 ml on 1м3 waters. At giving of fertilizers of 5 hours – necessary concentration of 40 ml on 1м3 waters.
2.2. The second processing in 2-3 weeks after the first with the same concentration.
2.3. The third processing in 2-3 weeks after 30 ml second with concentration on 1 м3 waters (at 10 hours of watering) or 60 ml on 1 м3 waters (at 5 hours of watering).
2.4. If necessary it is possible to spend and 4th processing in 2-3 weeks after the third with the same concentration.
At a strong lack of microcells of soil extraroot top dressing of plants (2-3 l on hectare is desirable also at the general expense of water 300-400). Last processing 2-3 weeks prior to maturing of fruits allows to improve quality of production.

 RECOMMENDATIONS FOR USE FERTILIZER BRAND «AMRITA»

Agricultures

While
soaking

Dates of foliar treatment
(
spraying)

Potato

1-3 hours.

first time - at occurrence of full shoots; the second - in a budding - the flowering beginnings.

Root crops (carrots, a garden radish, a beet, etc.)

Beets-24 of hour,

Carrots - 48 hour. The others-12 hour.

first time - at occurrence of 3-5 leaves; the second - in 15-20 days after the first.

 

Families

Cabbage and olive (рапс, sunflower)

 

12 hours

For cabbage: the first time in 14-17 days after landing of sprouts or in 15-20 days after occurrence of the shoots, the second - in the beginning of setting of a head of cabbage. For the olive: the first time – in a stage of 2-4 sheets; the second – in a stage  budding, sunflower - in the early formation of the basket.

Pumpkin (a cucumber, a vegetable marrow, a pumpkin, a melon, a water-melon, etc.)

 

12 hours.

first time - in a stage of 3-5 present leaves or at  seedling  a way of cultivation - in a week after sprouts disembarkation in a ground; the second - in 15-20 days after the first.

Solanaceae (tomato, pepper, eggplant, etc.).

 

24 hours

first time - at occurrence of 3-4 leaves or at  seedling a way of cultivation - in 3-7 days after sprouts disembarkation in a ground; the second - in a stage  budding.

Leguminous (a soya, a string bean, peas, etc.)

 

12 hours

first time - in a stage of 3-5 leaves; the second - in a stage  budding .

Corn

12 hours

first time - in a stage of 3-5 leaves; the second - to  buttonhole  whisks.

Green agricultures (Onions, garlic, salad, fennel, parsley)

Salad, bulbs-24chas, the others-48chas.

first time - at occurrence of 3-4 leaves; the second - in 15-20 days.

 

Wild strawberry

dipping  roots of plants before disembarkation in a ground.

first time - in a stage  budding ; the second - on green  ovary .

Fruit-trees and berry bushes

обмакивание roots of plants before disembarkation in a ground.

first time – before blooming of kidneys (not later than a stage of a green cone); the second – before flowering.

 

Grapes

Endurance of shanks in a solution 24 hours.

first time - before flowering; the second - in formation  ovary .

Grain crops, annual and long-term cereal grasses

 

12 hours

For spring crops: the First time - in a tillering stage; the second – in an exit stage in a tube. For the winter: the first time in an exit stage in a tube; the second – in a stage  earring . For cereal grasses: the first time in the beginning  long-term or in a stage annual; the second - in an exit stage in a tube.

Technical sacks-rounds   (a cotton, flax)

 

12 hours

first time – in a stage of 2-4 leaves; the second – in a stage  budding .

Cereal cult-ry (buckwheat, rice, millet, sorghum, etc.)

 

12 hours

For buckwheat: the first time – in a stage of 3-4 leaves; the second - in a stage budding, the flowering beginnings. For other cultures – the first time in a stage  earring ; the second - in an exit stage in a tube.


 

Repeated processing of plants necessarily.

1. Preparation of a working solution for not root processing of plants - fertilizers get divorced in the settled water in the ratio 1:2000. Norms of application of a working solution: 300-500 l. on hectare.

2. Preparation of a working solution for root processing of plants - fertilizers get divorced in the settled water in the ratio 1:1000. Are applied also to local processing of soil, soil formation, composting. It is recommended in case of droughty summer.

Recommendations on a basis the analysis express train

Bean

FEATURES OF BEAN CULTURES
For bean cultures normal receipt of molybdenum is necessary. The physiological role of molybdenum is connected with fixing of atmospheric nitrogen, a reduction нитратного nitrogen in plants, participation in oxidation-reduction processes, a carbohydrate exchange, in synthesis of a chlorophyll and vitamins. At a lack of molybdenum of fabrics of plants a considerable quantity of nitrates collects and the normal metabolism at plants is broken. At a molybdenum lack process of a biological reduction of nitrates is braked, synthesis аминов, amino acids and fibers is slowed down. It results not only in crop reduction, but also to decrease in its quality.

AMRITA Uni-75 - BEAN


APPOINTMENT:
- Extraroot top dressing of field cultures.

STRUCTURE, г/л:
P2O5 – 25 K2O – 25 S – 7 Fe – 5-6 Zn – 3-4 Cu – 1,5-2 B – 2-3 Mn – 4-5 Mo – 2-3 Co – 0,3-1 humate – 15-20


 NORMS OF THE EXPENSE OF FERTILIZER

 

Selsko - economic culture

Fertilizer kind

NORMS OF THE EXPENSE


Processing phase

Extraroot top dressing

AMRITA Uni -75

Working solution

Bean cultures ( soya, peas, lupin, etc.)

AMRITA Uni -75– BEAN

3-4 L / ha

250-350 L / ha

Before the flowering beginning

AMRITA Uni -75-HELATE MOLYBDENIUM

0,7-1 L / ha

 

 Rice
FEATURES RICE
The rice plants are very demanding to providing micronutrients such as copper and zinc, which are responsible for photosynthesis and generate the reproductive organs of plants. Boron is necessary for the formation of rice plants tillering node, redistribution and accumulation of sugars.
The rice plants are the "battery" of silicon compounds, and accumulate it to 5% of its weight. Fertilizing plants rice soluble forms of silicon is very important both for plant growth, and to acquire strong immunity to fungal diseases.

 
AMRITA Uni -75-  Rice

 

APPOINTMENT:
- Preseeding processing of seeds (it is possible together with poisoning).
- Extraroot top dressing of field cultures.

STRUCTURE, г/л:
P2O5 – 50  K2O – 80  S – 12  Zn – 18-23  Cu – 23-30  B – 5-6  Mo – 0,15-0,2  Co – 0,04-0,1
 
NORMS OF THE EXPENSE OF FERTILIZER

 

Selsko-economic culture

Fertilizer kind

NORM OF THE EXPENSE

Processing phase

Processing of seeds

Extraroot top dressing

AMRITA Uni -75

Working solution

Rice

AMRITA Uni -75-  Rice

3-4 L / tn seeds

   

Simultaneously with poisoning

AMRITA Uni -75-  Rice

 

3-4 L / ha

250-350 L / ha

Whisk ejection

 
 Application of not diluted fertilizer and overdose are inadmissible!!!